STROBECOM II  M913 Detector Cable  

Product Brochures
STROBECOM II Catalog
 
Product Documentation
M913 Cable Information
2090/2091 Product
  Information

2090-SD Installation
  Instructions
Strobecom II System
  Manual


 
Related Products
STROBECOM II Detectors
 
Language Translator
 
You will need the Adobe® Acrobat® Reader to view the documention on our web site.
M913 Cable
Detector Cable
STROBECOM II Logo

1760 Detector Tester

The M913 STROBECOM® detector cable is made specifically for connecting 209X–SD detectors to 2000 and 3000 series optical signal processors. M913 cable is available in 500, 1000, and 2500 foot reels.


Specifications

Item Description
Conductors

Quantity -3
Gauge - AWG #20 (7 x 28) stranding
Conductor Material - Individually tinned copper strands
Insulation - PVC, 80C, 600V, 25 mil minimum average    thickness
Color -1 Blue, 1 Orange, and 1 Yellow

Shield Aluminized polyester film or approved equal, applied    with a nominal 20% overlap to provide 100% shield    coverage
Drain Wire Gauge - AWG #20 (7x28) stranding
Material - Individually tinned copper strands
Uninsulated and in contact with the shield conductive    surface
Electrical Characteristics Drain and conductor DC resistance shall not exceed 11.0    ohms per thousnd feet
Capacitance from 1 conductor to the other 2 conductors    and shield shall not exceed 48 pf/ft at 1000 Hz
Jacket Minimum average wall thickness - .045"
Temperature rating - 80C
Voltage rating - 600V
Material - PVC, Black
Nominal O.D. over jacket - .35" maximum